save on fuel costs and
reduce carbon emissions

Flue Gas Economisers

Fuel costs are typically reduced by between 4 and 6%

The typical temperature of flue gases flowing from the final pass of tubes from a 3 pass wetback 150 psi steam boiler would be 240 degrees C. This heat is then lost up the chimney to atmosphere but some of it could be recovered utilising a flue gas economiser, and used to pre-heat the boiler feed water. Hotter feed water requires less fuel input to raise steam, therefore saving fuel costs and reducing carbon emissions.

Fuel costs are typically reduced by between 4 and 6%, giving a very swift payback. An economiser is a pressurised heat exchanger with heat indirectly transferring between hot flue gas flowing around banks of tubes through which the feed water passes. The tubes are designed with spiralled surfaces to achieve maximum surface area and enhanced heat transfer. Economisers are available as an integral part of the Yorkshireman boiler or as a stand alone unit which can be retrofitted to an existing boiler on site.

Byworth Sales Engineers are available to help ascertain the most energy efficient solution for your particular application. This may be a standard Yorkshireman boiler with economiser or a Yorkshireman2 with X-ID tubing.

Call the sales team on 01535 665225 for further information.

Principal Features

  • Waste heat is recovered
  • Carbon emissions reduced
  • Internal or external versions available
    • Waste heat is recovered
    • Fuel bills reduced by 4 – 6 %
    • Carbon emissions reduced
    • Internal or external versions available
    • Similar efficiency can be achieved by a Yorkshireman2 without economiser
    • Only suitable for sulphur free fuels
    • Shorter lifespan than the boilers and replacement is costly
    • Regular maintenance is essential
    • Inverter driven pumps and modulating water level controls should be fitted